|
 |
|
| |
| Our Product |
 |
|
| |
| Our products are the manifestation of an integrated effort of engineers, research and development wing and our skilled and semi skilled workforce. Our Brazing Alloy product range includes: |
| |
| • |
Silver Brazing Alloy (with and without Cadmium) |
| • |
Silver Brazing Alloy (Phosphorous) |
| • |
Silver Brazing Alloys for Tungston Carbide Tipped Tools |
| • |
Copper Based Alloys |
| • |
Gas Welding Wire |
| |
|
|
| Copper Silver Phosphorous Brazing Alloys |
| The Brazing Alloys of this group primarily used for joining Copper Alloys with some limited use. Since it contain Phosphorous which from brittle iron and nickel phosphates, these alloys are not recommended for ferrous and nickel bearing. |
| |
| |
IS:2927 |
BS:1845 |
DIN
8513 |
Purpose |
Melting
Point |
| Rajat : 1105/14 |
BA CU P 5 |
- |
- |
Particularly adaptable when close fit cannot be held. Good ductility suitable for copper or Brass for clearance |
625-685°C |
| Rajat : 1104/5 |
BA CU P4 |
- |
- |
Similar to BA CU P5 but slightly more fluid and is best used with ----- joint clearance. |
625-685°C |
| Rajat : 1103/2 |
BA CU P3 |
- |
- |
It has high fluffily and sluggish flow. Used for copper joints with wider clearance |
625-685°C |
| Rajat : 1100 Copper Alloy Wire |
BA CU P2 |
- |
- |
It is extremely fluid at the brazing temperature will penetrate joints with very little clearance. For Copper and brass good fill-up and clearance |
705°C |
|
|
|
|
|
|
 |
|
|
| Silver Wire |
|
 |
| This group of Alloy is primarily meant as a solicitude for the Cadmium bearing alloys. This alloy mainly composed of Silver, Copper, Zinc and some cases..... |
 |
|
| |
| Silver Rods |
|
 |
| The most distinctive brands are those that dare to be different. A company with a compelling brand identity and message is both memorable and alluring. |
|
|
| |
|
